Welcome to Propalock🟡
LOCKING SYSTEM
PROPALOCK
Propalock is the new, innovative locking system fitted to adjustable telescopic steel props. Manufactured in accordance with British Standard (BS 4074:1982 and current BS EN 1065:1999) its purpose is to contribute to the security and management of safe working practices in temporary works/support situations during construction work.
Propalock is a management tool for the control of temporary support, improving health and safety practices. The universal popularity of adjustable steel props is due to the fact that they provide the simplest, quickest, most reliable and economic method of temporary support at any height between their closed and extended positions.Adjustable telescopic steel props comprise of a large diameter screw thread on the outside of the outer (lower) tube, a collar nut to achieve fine adjustment along the thread, and a loose pin through a series of holes in the inner (upper) tube to give a wider range of adjustment.
A propalock is initially installed to the outer lower tube of the prop. Following normal erection procedure by site staff, Propalock is fitted into its operating posifion by a responsible person – a temporary works co-ordinator (TWC). It is at this point the TWC assumes control of the temporary works implemented on site.
PROPALOCK APPLICATION
Virtually all construction projects require temporary support – particularly those that involve an element of structural instability and partial demo
One of the most common ways of supporting structures in such projects is with the use of adjustable telescopic steel props. However this type of work is an area – identified by health and safety organisations worldwide in which a large number of accidents occur. Health and Safety organisations have also identified current practices relating to ‘temporary demountable structures’ within the events sector as potentially lacking management consistency resulting in a negative effect on safety.
Propalock is an innovative locking system, fitted to steel props, keeping them secure. Crucially, Propalock should only be operated by a designated site supervisor. This means unauthorised tampering with steel props is impossible – improving health and safety in the workplace.
Three-story terrace block collapsed in Sheffield
In Mach 2013, three people were left injured and around 20 made…. ..….
Collapse of Two properties in Fulham Road
HSE Inspectors blamed poor installation and positioning of….
Building Collapsed in Ashton-Under-lyme
This building in Ashton-Under-lyme collapsed seconds after….
Propalock has been designed to fit adjustable telescopic steel props manufactured to comply with British Standards BS 4074: 1982 and BS EN: 1065:1999.
Propalock has 7mm tolerance to accommodate fitting and minor variations in steel prop diameter that may be the result of normal wear and tear, corrosion or build-up of surface finish such as overpainting.
Propalock is fitted to the lower overtube of the steel prop.
Propalock uses a fine-pitch threaded bolt with a unique coded head.
Once fitted and locked, movement of the collar is not possible, thereby preventing northwards adjustment of movement.
Propalock can be manufactured in corporate or company colours, dependent on the quantities ordered.
The diameter of the lower outer tube is 60mm, the circumference is 189mm.
Propalock’s operating diameter range is 64mm when open and 57mm closed.
Propalock is designed and manufactured in England.
UK Patent no: GB2482581 US Patent no: 8,998,159B2